Sale!

Scott Aerator Boilermaker Surface Aerator 1/2 - 1.5hp

$1,399.00$1,979.00

Clear

Having trouble adding to cart or have general questions? Please choose options above or call 1-833-779-2837 for assistance.

The Boilermaker surface aerator is a premier, high-volume model designed for maximum oxygen transfer and water flow.  All models here feature 70 feet of power cord and are 115 volt units except for the 1.5hp model which features 100 feet of power cord and is a 230 volt model.  Available in 1/2hp, 3/4hp, 1hp and 1.5hp we are sure to have the size unit you need.  To determine which horsepower unit you need use this general rule:  1 hp per acre of pond size.  The following chart shows this:

HorsepowerMinimum Pond SizeMaximum Effective Pond SizeMinimum Water Depth RequiredMax Water Depth For Effectiveness
1/21/2 acre1 acre32″10 feet
3/41/2 acre1.5 acre32″10 feet
11 acre2 acre38″10 feet
1 1/21 acre3 acre38″10 feet

 

 

 

The low-profile design of the Boilermaker creates the high-volume, “white boil” effect of highly aerated water with a minimal vertical display. If pond health is your primary consideration, the Boilermaker’s high oxygen transfer rates and large volume of water circulation make it an ideal selection.

The Boilermaker works well as a pond de-icer in winter, too. To operate the unit as a deicer just tighten up the ropes to partially submerge the unit then turn the unit on.  The Scott Aerator Company has engineered all of its water features to eliminate the need for time-consuming, costly winterizing products and procedures. Simply leave your aerator or fountain in the water, turn the power supply off, and forget about it for the winter. Once the water thaws in the spring, re-establish power to the unit and you’re good to go. All components will withstand sub-zero conditions without damage.

The Boilermaker is manufactured utilizing a stainless steel, oil-free, submersible motor, making it the most environmentally friendly water aerator on the market. There’s no oil to change, no maintenance required, and no control box needed.

Each Boilermaker comes standard with 70 feet of heavy-duty, 12-gauge, submersible power cord. Greater power cord lengths are also available. Please contact us about larger motor sizes and voltage options including 2 and 3hp units and three phase motor options as well.

GFCI required. Please disconnect power source when swimmers are present.

Scott Aerator: Boilermaker surface aerator is a premier, high-volume model designed for maximum oxygen transfer and water flow.  All models feature 70 feet of power cord and are 115 volt units except for the 1.5hp model which features 100 feet of power cord and is a 230 volt model.  The low-profile design of the Boilermaker creates the high-volume, “white boil” effect of highly aerated water with a minimal vertical display. If pond health is your primary consideration, the Boilermaker’s high oxygen transfer rates and large volume of water circulation make it an ideal selection.